|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
65 members (BWV846, Anglagard44, clothearednincompo, brdwyguy, amc252, Bellyman, 16 invisible),
2,249
guests, and
382
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Mar 2021
Posts: 544
500 Post Club Member
|
OP
500 Post Club Member
Joined: Mar 2021
Posts: 544 |
When steinway says 20 Celcius (68F) with 45% to 70% humidity.
That's between 6.58 and 10.23 in g(water) PER kg(air)
At 17.2C (63F) that would correspond to 53.5% to 83.5% humidity
At 26.6C (80F) that would correspond to 29.5% to 46% humidity
What is the manufacturer using for target when they give their recommendation?
Last edited by EinLudov; 04/16/21 10:21 AM.
|
|
|
|
Joined: Aug 2004
Posts: 4,555
4000 Post Club Member
|
4000 Post Club Member
Joined: Aug 2004
Posts: 4,555 |
When pianos were invented, central heating didn't exist most places, and the average room temperature in Europe was probably about 13 C.
gotta go practice
|
|
|
|
Joined: May 2001
Posts: 6,567
6000 Post Club Member
|
6000 Post Club Member
Joined: May 2001
Posts: 6,567 |
Your hygrometer will show the relative humidity (RH) . Just keep the piano between 45% to 70% RH according to your hygrometer.
The absolute values are for HVAC people to calculate the necessary loads. You don’t have to bother about them.
|
|
|
|
Joined: Mar 2021
Posts: 544
500 Post Club Member
|
OP
500 Post Club Member
Joined: Mar 2021
Posts: 544 |
Your hygrometer will show the relative humidity (RH) . Just keep the piano between 45% to 70% RH according to your hygrometer.
The absolute values are for HVAC people to calculate the necessary loads. You don’t have to bother about them. Thx for the input hakki, I just wonder how they came up with that and what exactly are they targeting with those numbers, I assumed it's how much water is actually in the air, hence my conversion to g(water)/kg(air). But I thought I'd ask to make sure, because the temperature can greatly alter that range as demonstrated in the OP.
Last edited by EinLudov; 04/16/21 11:58 AM.
|
|
|
|
Joined: May 2001
Posts: 6,567
6000 Post Club Member
|
6000 Post Club Member
Joined: May 2001
Posts: 6,567 |
It is because the equilibrium moisture content of wood is related to relative humidity and not to absolute humidity. Change in temperature has less affect on moisture content for a specific relative humidity. See below for a detailed explanation: https://www.woodproducts.fi/content/moisture-properties-wood
|
|
|
|
Joined: May 2001
Posts: 6,567
6000 Post Club Member
|
6000 Post Club Member
Joined: May 2001
Posts: 6,567 |
|
|
|
|
Joined: Mar 2021
Posts: 544
500 Post Club Member
|
OP
500 Post Club Member
Joined: Mar 2021
Posts: 544 |
Based on your first link, Hakki, do you know if anyone has a highlighted area in such a diagram specific for piano. Or are they saying Anything between the RH70 and RH40 line are OK. Of course within human survivable range.
Last edited by EinLudov; 04/16/21 07:03 PM.
|
|
|
|
Joined: Jan 2006
Posts: 3,854
3000 Post Club Member
|
3000 Post Club Member
Joined: Jan 2006
Posts: 3,854 |
At any given RH, over the sort of range of temperature that is typical of a living room, the wood moisture content varies very little. That is why it is recommended to keep the RH as near-constant as possible, if a piano is to be happy. The actual value of RH is less important - it could be 45%, 50%, 55% - but the more constant it is at whatever value you have chosen, the better.
I am not sure what you mean by the "highlighted area"? An area is not being highlighted in this diagram. The red dashed lines are an example of how to use the diagram - i.e. if the air temperature was 22C and the RH 50%, then the wood moisture content will be a bit less than 10%. If the room temperature was 15C and the RH is 50%, then the wood moisture content would be almost spot-on 10%.
I don't understand why you are shading the region between 40% and 70% in blue?
|
|
|
|
Joined: Mar 2021
Posts: 544
500 Post Club Member
|
OP
500 Post Club Member
Joined: Mar 2021
Posts: 544 |
I am not sure what you mean by the "highlighted area"? An area is not being highlighted in this diagram. The red dashed lines are an example of how to use the diagram - i.e. if the air temperature was 22C and the RH 50%, then the wood moisture content will be a bit less than 10%. If the room temperature was 15C and the RH is 50%, then the wood moisture content would be almost spot-on 10%. I clarified with a second diagram, the first one was the example given in the website for some other purpose.
|
|
|
|
Joined: Jan 2006
Posts: 3,854
3000 Post Club Member
|
3000 Post Club Member
Joined: Jan 2006
Posts: 3,854 |
Well I would have thought that 70% is perhaps a bit high, but otherwise the RH values in this range are probably ok. (Hopefully we might get professional comment on this.) But you do not want the RH to go bouncing up and down within this range if you can help it. Aim to keep the RH as constant as possible - in other words, pick a value and stick to it.
I control the RH in my piano room to remain strictly within a narrow 5% band (i.e. not varying more than about 2.5% from the mean value), and as a result the pianos exhibit remarkable tuning stability. Even the 1804 piano with all-wood construction.
|
|
|
|
Joined: May 2001
Posts: 6,567
6000 Post Club Member
|
6000 Post Club Member
Joined: May 2001
Posts: 6,567 |
The thick lines are moisture content lines not relative humidity. Relative humidity lines are horizontal lines. The below link might be better. https://www.woodworkerssource.com/wood-moisture-content.html
|
|
|
|
Joined: Jan 2006
Posts: 3,854
3000 Post Club Member
|
3000 Post Club Member
Joined: Jan 2006
Posts: 3,854 |
Very good references Hakki, thanks.
|
|
|
|
Joined: Mar 2021
Posts: 544
500 Post Club Member
|
OP
500 Post Club Member
Joined: Mar 2021
Posts: 544 |
Right, I am trying to understand what exactly are they targeting. So by that diagram, and their explanation had something to do with the tensile property of wood relative to wood moisture. So in that context, it could be that area I highlighted. Is that the case or some other target? RH is the range given, but What is it trying to achieve, what protection or property is the limiter.
Last edited by EinLudov; 04/16/21 07:46 PM.
|
|
|
|
Joined: May 2001
Posts: 6,567
6000 Post Club Member
|
6000 Post Club Member
Joined: May 2001
Posts: 6,567 |
No it is not the area you have highlighted.
What Steinway is saying that their wood will be okay with a moisture content between 8.5 and 13.1.
|
|
|
|
Joined: Dec 2012
Posts: 6,714
6000 Post Club Member
|
6000 Post Club Member
Joined: Dec 2012
Posts: 6,714 |
It isn't just the wood that is hygroskopic. Wool felt is as well. Wood takes on moisture much quicker than it gives it out to dry air. Same is true of wool, but wool takes moisture in even quicker than wood.
This difference in absorbing rates is why protecting against humidity spikes is the first line of piano defense.
In a seemingly infinite universe-infinite human creativity is-seemingly possible. According to NASA, 93% of the earth like planets possible in the known universe have yet to be formed. Contact: toneman1@me.com
|
|
|
|
Joined: Jan 2006
Posts: 3,854
3000 Post Club Member
|
3000 Post Club Member
Joined: Jan 2006
Posts: 3,854 |
Right, I am trying to understand what exactly are they targeting. So by that diagram, and their explanation had something to do with the tensile property of wood relative to wood moisture. So in that context, it could be that area I highlighted. Is that the case or some other target? RH is the range given, but What is it trying to achieve, what protection or property is the limiter. Can you clarify? I am not sure who are "they", and I am not sure what you mean by "targeting".
|
|
|
|
Joined: Sep 2018
Posts: 489
Full Member
|
Full Member
Joined: Sep 2018
Posts: 489 |
To my mind when a piano manufacture is recommending a range of acceptable humidity levels they are thinking of the integrity of the soundboard rather than the tuning stability. As already stated in this thread tuning stability needs a constant humidity and temperature. I am afraid I don't know enough about the design of a soundboard such as the direction of annular rings, the effect of the crown etc to be able to calculate what change in moisture level could result in splits along the grain of the timber or parting of the glued joints.
|
|
|
|
Joined: Mar 2021
Posts: 544
500 Post Club Member
|
OP
500 Post Club Member
Joined: Mar 2021
Posts: 544 |
No it is not the area you have highlighted.
What Steinway is saying that their wood will be okay with a moisture content between 8.5 and 13.1. So that is exactly what they are targeting moisture content ?
Last edited by EinLudov; 04/17/21 12:39 PM.
|
|
|
|
Joined: May 2001
Posts: 6,567
6000 Post Club Member
|
6000 Post Club Member
Joined: May 2001
Posts: 6,567 |
EMC for 68F and 45% RH is 8.5 EMC for 68F and 70% RH is 13.1 This is what Steinway says on their website. The most favorable environment for your piano is a relative humidity ranging between 45% and 70% and a constant temperature of approximately 20˚C. Sudden fluctuations in temperature must be avoided as the tuning and regulation might be influenced negatively.
|
|
|
Forums43
Topics223,403
Posts3,349,419
Members111,636
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|