|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
71 members (Abdulrohmanoman, Charles Cohen, accordeur, BWV846, Animisha, benkeys, Anglagard44, 13 invisible),
2,325
guests, and
431
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jan 2002
Posts: 109
Full Member
|
OP
Full Member
Joined: Jan 2002
Posts: 109 |
Help me.Would you recommend to me the best of silicone oil?( product) Yoshio web page
|
|
|
|
Joined: Aug 2001
Posts: 635
500 Post Club Member
|
500 Post Club Member
Joined: Aug 2001
Posts: 635 |
Are you looking for a polish or a lubricant?
Since 1975; Full-time piano tuner/tech in Nashville; Lacquer and polyester specialist. www.SamLewisPiano.com
|
|
|
|
Joined: Jan 2002
Posts: 109
Full Member
|
OP
Full Member
Joined: Jan 2002
Posts: 109 |
Thank you for your reply .(SamLewisPiano.com) I mean lubricating oil. Could you tell me what commodity do you have in mind?(silicone oil) Yoshio
|
|
|
|
Joined: Aug 2001
Posts: 635
500 Post Club Member
|
500 Post Club Member
Joined: Aug 2001
Posts: 635 |
Yoshio- as a lubricant, you can buy silicone oil commercially, and mix it with naptha, also easily available (at least it is here in the U.S.) 8 parts naptha to one part silicone oil makes a good lubricant for piano parts. Caution: never allow any kind of lubricant near the strings or tuning pins. If you are lubricating parts, be sure to blow out the dust first. There are technicians who are not comfortable with silicone anywhere near a piano for fear of hurting the pinblock. I have never had a problem with that, but once again, I caution you to use care........Sam
Since 1975; Full-time piano tuner/tech in Nashville; Lacquer and polyester specialist. www.SamLewisPiano.com
|
|
|
|
Joined: May 2001
Posts: 9,217
9000 Post Club Member
|
9000 Post Club Member
Joined: May 2001
Posts: 9,217 |
I hope you aren't planning to use it anywhere on a piano! Silicone migrates. Its molecules literally become airborn and travel to places you didn't intend for it to gom like the pinblock. Get it on the finish and if you ever refinish the piano you'll have three times the work trying to get the new finish to flow out. You should *never* use a silicone product on a piano.
|
|
|
|
Joined: Jul 2001
Posts: 647
500 Post Club Member
|
500 Post Club Member
Joined: Jul 2001
Posts: 647 |
Surely easier and safer to buy "Protek" from a supply house which is non silicon based.
|
|
|
|
Joined: Aug 2001
Posts: 635
500 Post Club Member
|
500 Post Club Member
Joined: Aug 2001
Posts: 635 |
I really dont want to get the silicone thread started again, but I will restate (as a piano tech and refinisher) that silicone properly used will not hurt the piano (Baldwin used it in the factory) or the finish (silicone contamination is easily corrected prior to spot finishing or full finishing- we do it automatically). Silicone on a finish can be neutralized with naptha. However, I do agree that ProTek is a great choice, but did not know if its available in Japan for Yoshio.....Respectfully, Sam
Since 1975; Full-time piano tuner/tech in Nashville; Lacquer and polyester specialist. www.SamLewisPiano.com
|
|
|
|
Joined: Jan 2002
Posts: 109
Full Member
|
OP
Full Member
Joined: Jan 2002
Posts: 109 |
Everyone is grateful. I'‚ going@to use the@silicone@oil@at center|pins. I was very much interested in the following sentence. "mix it with naptha, also easily available (at least it is here in the U.S.) 8 parts naptha to one part silicone oil "
"Its molecules literally become airborn and travel to places" "Baldwin used it in the factory"
"ProTek is a great choice Silicone on a finish can be neutralized with naptha." "Protek"
I will use the@oil carefully. ‚shank@you@many@advice‚“ and@kindnessDYoshio
|
|
|
|
Joined: Jul 2001
Posts: 647
500 Post Club Member
|
500 Post Club Member
Joined: Jul 2001
Posts: 647 |
Hi Sam, being in South Africa I order parts from overseas suppliers, as Yoshio can.
|
|
|
|
Joined: Jun 2001
Posts: 884
500 Post Club Member
|
500 Post Club Member
Joined: Jun 2001
Posts: 884 |
I use wd40 for centerpins and on the vbar when raising the pitch 100 cents or so. I do not use the aresol kind, but rather the liquid which can be bought in gallon containers. I apply it as I do protec with a hypodermic needle. I have never had a problem with it. Keep it away from the tuning pins. Hyopdermic needles may be bought over the counter in New Mexico. They are also great for applying CA glue. A large animal syringe can be used to apply gap filling CA glue. By them at veterinary supply stores. I have been told that lighter fluid makes a good centerpin lubricant in a pinch. I have never tried it. I like the clear Maclube for front and balance rail pins after polishing. I like Slideall for lubricating the piano bed to help slide in the action. Lubricants are interesting. Any other ideas?
pianoseed
|
|
|
|
Joined: Oct 2001
Posts: 1,237
1000 Post Club Member
|
1000 Post Club Member
Joined: Oct 2001
Posts: 1,237 |
THammer-- From what I've heard, it is unwise to use WD40 on the center pins bushings because it will tend to attract dirt and actually worsen sluggishness. For some time now, I've used protek and gotten excellent results--even with the verdigris problem encountered in older Steinways(except that it tends to put that problem in remission and the sluggishness inevitably returns). Mark Mandell www.pianosource.com
|
|
|
|
Joined: Jan 2002
Posts: 1,969
1000 Post Club Member
|
1000 Post Club Member
Joined: Jan 2002
Posts: 1,969 |
I agree with reblder, prote is the way to go for centerpins. For front and balance rail I use a teflon such as triflow or a micro teflon powder. I only use teflon powder on the roller.
Blüthner USA, LLC
|
|
|
|
Joined: Jan 2002
Posts: 1,969
1000 Post Club Member
|
1000 Post Club Member
Joined: Jan 2002
Posts: 1,969 |
I agree with reblder, protek is the way to go for centerpins. For front and balance rail I use a teflon such as triflow or a micro teflon powder. I only use teflon powder on the roller.
Blüthner USA, LLC
|
|
|
|
|
Piano
by Gino2 - 04/17/24 02:34 PM
|
Piano
by Gino2 - 04/17/24 02:23 PM
|
|
|
Forums43
Topics223,405
Posts3,349,434
Members111,637
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|