|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
68 members (BillS728, aphexdisklavier, bobrunyan, anotherscott, AaronSF, apianostudent, beeboss, brdwyguy, 17 invisible),
2,244
guests, and
372
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: May 2007
Posts: 3,202
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: May 2007
Posts: 3,202 |
A video on YouTube from a respected piano dealer and restorer in England mentioned the use of talc (magnesium silicate powder) on grand knuckles.
I responded mentioning Teflon powder, and a bit of discussion took place. They spoke of having found that Teflon can cause subsequent problems of adhesion of hide glue if replacing knuckles. They said also that Renner uses talc and supplies it for use on knuckles.
Mario Igrec in Pianos Inside Out says that talc in certain applications can give rise to squeaks.
Do you have preferences, and have you noticed any advantages or disadvantages for Teflon or talc, for various piano applications?
|
|
|
|
Joined: Feb 2017
Posts: 7,147
7000 Post Club Member
|
7000 Post Club Member
Joined: Feb 2017
Posts: 7,147 |
I use Teflon as a rule for this. I think it's a matter of degree. It does not take much.to getvthe job done, and actually you don't want them to be slippery. Some friction is needed there.
I only use talc on my hands for stringing.
Another option is soapstone. I have some soapstone sticks that I use occasionally (only because my first reach is usually for the Teflon out of habit). It is probably safer in the long run. There are potential health risks associated with Teflon. One client (also a doctor) when he saw me using it said that he was pretty sure that it could be absorbed through the skin, though in have not been able to verify this. That made me stop and think a bit though.
Pwg
|
|
|
|
Joined: Apr 2010
Posts: 2,326
2000 Post Club Member
|
2000 Post Club Member
Joined: Apr 2010
Posts: 2,326 |
I also more commonly use PTFE powder. I originally was taught to use soapstone -- which falls under the general category of talc but is different from talc normally available as baby powder (which also may have additives like corn starch). I get soapstone sticks from a welder's supply and grind it into powder on the spot using my sandstick. I just rub the soapstone stick on my sandstick and collect it on a piece of paper.
Either way, I apply powder with a cheap metal-handled brush available in hardware stores.
PTFE and soapstone have a slightly different feel. PTFE seems to be "slipperier" while soapstone seems to be "silkier".
I would only use talc as a third option if neither of the above were available. It would certainly be better than nothing.
Not sure where the concern about using PTFE comes from. It's used in various things implanted into the human body. One of the most chemically non-reactive things there is.
Keith Akins, RPT Piano Technologist USA Distributor for Isaac Cadenza hammers and Profundo Bass Strings Supporting Piano Owners D-I-Y piano tuning and repair editor emeritus of Piano Technicians Journal
|
|
|
|
Joined: May 2007
Posts: 3,202
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: May 2007
Posts: 3,202 |
Interesting responses, Peter and Keith. There has previously been discussion about whether PTFE (Teflon) powder is potentially harmful, and it really isn't. Talcum powder appears to be more risky, health-wise. There is no risk to the body from absorbing PTFE powder through the skin. I guess if one inhaled huge quantities every day, it might in time do SOMETHING to the lungs, but that's an extremely unlikely scenario.
The guy at the piano retailer/restorer said that Renner use talc, and supply it for action work. I thought that was interesting, and wondered why talc.
|
|
|
|
Joined: Dec 2012
Posts: 6,714
6000 Post Club Member
|
6000 Post Club Member
Joined: Dec 2012
Posts: 6,714 |
I think some people have conflated the health problems some makers of "teflon" materials have in the manufacturing process into making the material itself is unsafe. Teflon is inert. If you heat it high enough to burn you can create some dangerous compounds.
The contention teflon could "pollute" a glue joint is crazy. Just blow it off outdoors with compressed air and you won't have any problems.
I never use talc or soapstone, the teflon powder works so much better.
Last edited by Ed McMorrow, RPT; 07/31/18 11:26 PM. Reason: reword first sentence
In a seemingly infinite universe-infinite human creativity is-seemingly possible. According to NASA, 93% of the earth like planets possible in the known universe have yet to be formed. Contact: toneman1@me.com
|
|
|
|
Joined: May 2007
Posts: 3,202
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: May 2007
Posts: 3,202 |
I think you're right about the 'conflated' perception, Ed. The manufacturing process for PTFE is not without hazards, but the finished material is not toxic. I previously used the illustration of cast iron - a foundry is a dangerous place to work, full of hazards. But a cast iron piano plate is fairly inert! According to Marcus Roberts of Roberts Pianos, Renner use, and supply for their actions, Talc, and not Teflon powder. I wonder why that is. The Youtube discussion is here https://youtu.be/jjnRKWkmHB4
|
|
|
|
Joined: Nov 2008
Posts: 6,425
6000 Post Club Member
|
6000 Post Club Member
Joined: Nov 2008
Posts: 6,425 |
Jeff Deutschle Part-Time Tuner Who taught the first chicken how to peck?
|
|
|
|
Joined: May 2007
Posts: 3,202
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: May 2007
Posts: 3,202 |
There are serious questions about Talc. I mentioned it as risky a few posts ago.
|
|
|
|
Joined: Feb 2017
Posts: 7,147
7000 Post Club Member
|
7000 Post Club Member
Joined: Feb 2017
Posts: 7,147 |
I guess I will worry no more about PTFE.
Pwg
|
|
|
|
Joined: Jan 2014
Posts: 401
Full Member
|
Full Member
Joined: Jan 2014
Posts: 401 |
There are potential health risks associated with Teflon. One client (also a doctor) when he saw me using it said that he was pretty sure that it could be absorbed through the skin, though in have not been able to verify this. That made me stop and think a bit though. Pwg I'm not a doctor, but I thought Teflon was safe unless you smoke it. I sure hope TALC is safe, as it's one of the ingredients in some baby powders.
Last edited by AWilley; 08/01/18 08:53 PM.
|
|
|
|
Joined: Apr 2010
Posts: 2,326
2000 Post Club Member
|
2000 Post Club Member
Joined: Apr 2010
Posts: 2,326 |
There are potential health risks associated with Teflon. One client (also a doctor) when he saw me using it said that he was pretty sure that it could be absorbed through the skin, though in have not been able to verify this. That made me stop and think a bit though. Pwg I'm not a doctor, but I thought Teflon was safe unless you smoke it. I sure hope TALC is safe, as it's one of the ingredients in some baby powders. It's what Johnson and Johnson was just sued for some figure into the billions of dollars.
Keith Akins, RPT Piano Technologist USA Distributor for Isaac Cadenza hammers and Profundo Bass Strings Supporting Piano Owners D-I-Y piano tuning and repair editor emeritus of Piano Technicians Journal
|
|
|
|
Joined: Feb 2017
Posts: 7,147
7000 Post Club Member
|
7000 Post Club Member
Joined: Feb 2017
Posts: 7,147 |
Well, I am familiar with the high temperature issues such as can happen in a house fire or stove fire. I'm sure though that it isn't exactly a GOOD thing to be breathing in the powdered stuff, though it may not be "harmful"...best to try to keep it to a minimum. Hey...wood dust is also best kept out of the lungs as much as possible.
Anyway, I'm not going to fret over it.
Pwg
|
|
|
|
|
|
Piano
by Gino2 - 04/17/24 02:34 PM
|
Piano
by Gino2 - 04/17/24 02:23 PM
|
|
Forums43
Topics223,408
Posts3,349,457
Members111,637
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|