 |
Welcome to the Piano World Piano Forums
Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
|
|
44 members (David Lai, astrotoy, David B, D959, dcbluepiano, Dfrankjazz, 36251, Aare Havanese, 9 invisible),
386
guests, and
313
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
 interesting new clues to an old buzz
|
Joined: Jun 2009
Posts: 4,169
4000 Post Club Member
|
OP
4000 Post Club Member
Joined: Jun 2009
Posts: 4,169 |
Hi folks--
For many years, my 2010 190 Estonia has been haunted by a buzz. It comes and goes. Sometimes it's there for an hour, sometimes it appears and disappears within a minute, sometimes it's gone for weeks. It's never there when a technician is over. It's survived many tunings, voicings, and room redecorations.
I now think it's related to something in or near where the pedal mechanism attaches to the piano, and I'd love to get people's suggestions for possible culprits. Here's why I think the pedal:
1. I always thought the buzz was coming from the strings, so it was a big surprise when I found that when I stand up and put my ear towards the strings, the buzz goes away! On the other hand when I crouch under the piano and put my ear where the pedal shafts join the main body, I hear the buzz particularly loudly and localized.
2. When the buzz appears, it usually only sounds for a specific range of the sustain pedal. For instance, one day it might only buzz when the sustain pedal is down a tiny bit. Another day it might only buzz when the sustain pedal is down all the way. And another day it might only buzz when the sustain pedal isn't down at all.
So something that seems to be coming from where the pedal mechanism attaches to the piano, and is highly dependent on having the sustain pedal pressed down in a specific way... Any suggestions for things to try to tighten or mute?
Thanks for your help!
-Jason
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Dec 2012
Posts: 5,664
5000 Post Club Member
|
5000 Post Club Member
Joined: Dec 2012
Posts: 5,664 |
Is it possible there are adjustable fixtures on the pedal rods that are not tight? Is there a loose lock washer?
In a seemingly infinite universe-infinite human creativity is-seemingly possible.
According to NASA, 93% of the earth like planets possible in the known universe have yet to be formed.
Contact: Ed@LightHammerpiano.com
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Jan 2004
Posts: 2,131
2000 Post Club Member
|
|
2000 Post Club Member
Joined: Jan 2004
Posts: 2,131 |
A plain piece of rubber tubing can be used to help find odd noises on or under the piano - one side in your ear and the other side pointing to where you think the noise is sounding. Check springs, especially if there are coil springs, sometimes, a place where two poly finished pieces of wood come together can cause some noises..
The tubing might direct you to the pedal mechanism, or up inside the action cavity, or closer to the soundboard. It really helps to have someone else to play the notes while you crawl around under there!
Let us know what you find...
Ron Koval
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
Hi folks--
For many years, my 2010 190 Estonia has been haunted by a buzz. It comes and goes. Sometimes it's there for an hour, sometimes it appears and disappears within a minute, sometimes it's gone for weeks. It's never there when a technician is over. It's survived many tunings, voicings, and room redecorations.
I now think it's related to something in or near where the pedal mechanism attaches to the piano, and I'd love to get people's suggestions for possible culprits. Here's why I think the pedal:
1. I always thought the buzz was coming from the strings, so it was a big surprise when I found that when I stand up and put my ear towards the strings, the buzz goes away! On the other hand when I crouch under the piano and put my ear where the pedal shafts join the main body, I hear the buzz particularly loudly and localized.
2. When the buzz appears, it usually only sounds for a specific range of the sustain pedal. For instance, one day it might only buzz when the sustain pedal is down a tiny bit. Another day it might only buzz when the sustain pedal is down all the way. And another day it might only buzz when the sustain pedal isn't down at all.
So something that seems to be coming from where the pedal mechanism attaches to the piano, and is highly dependent on having the sustain pedal pressed down in a specific way... Any suggestions for things to try to tighten or mute?
Thanks for your help!
-Jason Use a hard wood rod as a stethoscope to detect buzzes (or a big screwdriver, as mechanics) I usually bang everywhere trying to hear the same buzz
Last edited by Olek; 10/29/15 05:54 AM.
Professional of the profession.
Foo Foo specialist
I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Aug 2002
Posts: 4,018
4000 Post Club Member
|
|
4000 Post Club Member
Joined: Aug 2002
Posts: 4,018 |
Check the brass fixtures for the Sostenuto system! They are very nice, elegant looking fixtures but they brass nuts tend to come loose and they buzz they way you have indicated. Estonia is the only brand I know of that has them. I have run across this very problem several times, so if I have an Estonia grand with fleeting buzzes as you describe, I know right where to go.
Simply remove the action and reach in to check those brass nuts and 10:1, you will find them loose enough to move with your fingers. They may be so loose that you will have to make sure you are not moving anything by tightening them (much like loose nuts from a key upstop rail) but once you tighten the nuts firmly with an open end wrench, those buzzes will be gone.
The piano is designed to carry sound, so it is no wonder that the buzzes travel and lead you to thinking they are coming from anywhere and everywhere but their actual source. I have not had the time lately to comment on anything here nor have I seen much if anything I could help with, so I hope this is one thing that is truly helpful.
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Jun 2009
Posts: 4,169
4000 Post Club Member
|
|
OP
4000 Post Club Member
Joined: Jun 2009
Posts: 4,169 |
Check the brass fixtures for the Sostenuto system! They are very nice, elegant looking fixtures but they brass nuts tend to come loose and they buzz they way you have indicated. Estonia is the only brand I know of that has them. I have run across this very problem several times, so if I have an Estonia grand with fleeting buzzes as you describe, I know right where to go.
Simply remove the action and reach in to check those brass nuts and 10:1, you will find them loose enough to move with your fingers. They may be so loose that you will have to make sure you are not moving anything by tightening them (much like loose nuts from a key upstop rail) but once you tighten the nuts firmly with an open end wrench, those buzzes will be gone. Thanks... I will definitely check this out! Could you (or someone else) please explain exactly where these brass fixtures are and what they look like? I know how to remove the action, but I'm not sure what I'll be looking for after it's removed. Thanks! -J
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Jun 2003
Posts: 28,830
Yikes! 10000 Post Club Member
|
|
Yikes! 10000 Post Club Member
Joined: Jun 2003
Posts: 28,830 |
He probably means the supports for the sostenuto bar that holds the tabs up when the pedal is pressed.
Semipro Tech
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Jun 2009
Posts: 4,169
4000 Post Club Member
|
|
OP
4000 Post Club Member
Joined: Jun 2009
Posts: 4,169 |
He probably means the supports for the sostenuto bar that holds the tabs up when the pedal is pressed. Could you explain what that looks like a bit more, please?  -J
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
This is in Bronze, or steel generally
Only the sostenuto rail is brass, or bronze, BTW, I am not sure.
Last edited by Olek; 11/09/15 08:22 AM.
Professional of the profession.
Foo Foo specialist
I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Jun 2009
Posts: 4,169
4000 Post Club Member
|
|
OP
4000 Post Club Member
Joined: Jun 2009
Posts: 4,169 |
Check the brass fixtures for the Sostenuto system!... Thanks for the suggestion. I think I located the fixtures you were talking about, but they were all secure.  -J
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Aug 2002
Posts: 4,018
4000 Post Club Member
|
|
4000 Post Club Member
Joined: Aug 2002
Posts: 4,018 |
Are you sure about that? The fixtures are brass in the Estonia and they are not the same as in other pianos. They are held in place by large (at least the width of a 5 cent coin) brass nuts. When those nuts get loose, they buzz.
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
I am not sure, probably bronze is more suitable than brass don"t you think ?
Professional of the profession.
Foo Foo specialist
I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Aug 2002
Posts: 4,018
4000 Post Club Member
|
|
4000 Post Club Member
Joined: Aug 2002
Posts: 4,018 |
Olek,
I was asking the original poster if he was sure about having found and checked what is most likely the culprit of the phantom sounds, not whether you think they would be brass or bronze. They are brass. There are four of them. Only one loose nut is enough to cause the problem but if there is one loose nut, there are probably four loose nuts. Brass nuts, not bronze. In fact, I think there may be two such nuts per unit. Something tells me that what is loose and buzzing in the sostenuto system simply has not been found yet but that is where the problem is, 100:1 likelihood. No other piano that I know of or have ever seen or worked on has the same configuration.
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
Interesting place for a buzz indeed.
They hold well generally as they are screwed in a good support. As all screws they may need some tightening.
There is often a system to regulate the position of the rail. And I have seen some that can be bowed, too.
Professional of the profession.
Foo Foo specialist
I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
Re: interesting new clues to an old buzz
|
Joined: Aug 2002
Posts: 4,018
4000 Post Club Member
|
|
4000 Post Club Member
Joined: Aug 2002
Posts: 4,018 |
I am not talking about screws, Isaac, I am talking about brass nuts that come loose and vibrate, the very same as nuts on the hammer rest rail or key upstop rail. Other kinds of sostenuto systems with other configurations have been known to develop loose fasteners too but the Estonia is one piano where that will surely happen sooner or later.
|
|
|
|
Forums41
Topics201,770
Posts3,005,864
Members98,642
| |
Most Online15,252
Mar 21st, 2010
|
|
|
|
|
|
|
