Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
I have a box of zinc oxide which I bought years ago from a supply house as "glue whiting." Of course,that is what I normally use it for. To give an example, there may be a loose ivory head where the cloth binder (ivory wafer) is still on the key, perhaps with a nick or two or a splintered spot. To glue it back without creating any dark spots, I would mix a bit the whiting into a brush load of hide glue. Apply the glue, clamp with a warm ivory clamp - just as you would clamp an ivory if you were actually using a new ivory wafer.
Well today I had the bright idea to do a quick repair by mixing the whiting with CA. I carefully prepared the surface, the ivory, and was planning to use a small scrap of action cloth as a "brush" of sorts. When the CA hit that Zinc Oxide, it literally smoked! The catalytic cure was so fast that I had to literally toss the action cloth out of the room. Needless to say I spent the next ten minutes getting the hardened lump off the key, removing the remnants of the old cloth binder layer, and using a traditional ivory wafer to do the repair.
This is one experiment that you should not try - it's not so hot, but is IS HOT!
You would think I would have run out of things not to try by now!
Lavender Piano Services Established 1977 Tuning, Concert Maintenance, Rebuilding & Restoration
The real smoke WAS coming from the action cloth scrap.
HMMMMMmmmmmm...
Perhaps the quick cure was from the heat of the reaction with the wool cloth, rather than a reaction to the zinc oxide itself. Either way, that was one hard lump of pigment to get off!
Lavender Piano Services Established 1977 Tuning, Concert Maintenance, Rebuilding & Restoration
Perhaps the quick cure was from the heat of the reaction with the wool cloth, rather than a reaction to the zinc oxide itself. Either way, that was one hard lump of pigment to get off!
That would be my guess. It's happened to me before with trying to fashion a shoelace end on bushing cloth... I don't think anything dangerous will happen, but it is rather scary if you're not expecting it. And yes, it does get hot!
. . . I would mix a bit the whiting into a brush load of hide glue. Apply the glue, clamp with a warm ivory clamp - just as you would clamp an ivory if you were actually using a new ivory wafer.
Well today I had the bright idea to do a quick repair by mixing the whiting with CA.
For a "cooler" approach to whiting the surface under the ivories, use "TypeWite" correction fluid. It goes on nicely with its own applicator and does not interfere with the CA.
I like the experiment, though. I've actually had in mind to do a Journal article on "Blowtorch Piano Technology".
Keith Akins, RPT Piano Technologist USA Distributor for Isaac Cadenza hammers and Profundo Bass Strings Supporting Piano Owners D-I-Y piano tuning and repair editor emeritus of Piano Technicians Journal
Why would you want to use CA under the ivory in first place .? It does not stay in time, and is a disater or future repair. Someone talk of mixing ca whith titanium oxyde to repair plastic keys so it something else that fumes
Last edited by Olek; 03/08/1303:59 AM.
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
Once I tried zinc oxide with white wood glue but it does not work. The whitening effect is not so great and the glue won´t work as well as before. Titanium oxide seems to be better (I heard. Never tried it by myself). Using the right glue might be better. You can get it from Laukhuff:
Once I tried zinc oxide with white wood glue but it does not work. The whitening effect is not so great and the glue won´t work as well as before. Titanium oxide seems to be better (I heard. Never tried it by myself). Using the right glue might be better. You can get it from Laukhuff:
Ah thanks, I did not knew that . I use some in hide glue for ivories (and cannot understand why some are still messing with CA for that job, ivories are porous, thin, and need to be protected so they can be glued correctly later.
WHite PVA glue can be used, eventually, I have seen it thickened with a "charge" of white mineral powder so it is whitened more (if not it will be greiyish to yellowish)
I also suggest that the wood below the ivory need to expand and contract, and I am far from sure that any CA based gluing can allow that (that may be a reason why I have seen CA glueing of ivory fail after some time)
We rarely see wafers on the best pianos (ivories are thick then) anyway it was not the case before WWII.
I understand that the wafer may provide a supple joint between ivory and wood, so we dont see the ivory cracks that can be noticed sometime (rarely in my experienc)
They can be made with what we call "cheese cloth" and the white skin and bone glue... The "cloth" for medical use is probably OK as well.
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
Perhaps the quick cure was from the heat of the reaction with the wool cloth, rather than a reaction to the zinc oxide itself. Either way, that was one hard lump of pigment to get off!