|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
69 members (accordeur, BWV846, Animisha, benkeys, Anglagard44, brdwyguy, 15 invisible),
2,323
guests, and
433
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Nov 2006
Posts: 8
Junior Member
|
OP
Junior Member
Joined: Nov 2006
Posts: 8 |
Hi Everyone, Has anyone encountered this problem before? I just tuned a Yamaha U3 and the age is about 30 plus to 40 years old but the condition is still quite good. when i tuned one of the keys in the bass (double strings: one hammerhead strike 2 copper strings) with my Yamaha Scope in unison, they sound very out of tune. That's strange. It should sound in tune when tune in unison. As a result, i purposely tune the 2 strings at different pitch (e.g. 10 cents apart), they turn out sounding better. What's wrong with this? Is it something wrong with the string or could it be due to the age of the piano? I have come across another similar problem before. What's the best way to settle this problem?
|
|
|
|
Joined: Mar 2008
Posts: 4,263
4000 Post Club Member
|
4000 Post Club Member
Joined: Mar 2008
Posts: 4,263 |
What's the best way to settle this problem? Tune the bass strings by ear instead of machine.
|
|
|
|
Joined: Nov 2007
Posts: 6,828
6000 Post Club Member
|
6000 Post Club Member
Joined: Nov 2007
Posts: 6,828 |
First of all, the hammer is probably hitting two separate "notes" which is making it sound that way. That needs to be fixed if that is the case. Possibly repinning or, possibly tightening and spacing the flange alone with filing the hammer once that is done.
2ndly, one should never tune pianos only using a machine. Your ears should be trained to be able to know what is right and what is wrong. In this case, apparently, you cannot tell the difference enough to know so, you trust the machine instead of your ears. IF, the hammer is hitting two different notes, that is, the string on the note next to it, and you tune that note to what the machine says when that is not really the problem, you are asking for a broken wire or a horribly out of tune piano.
Jerry Groot RPT Piano Technicians Guild Grand Rapids, Michigan www.grootpiano.comWe love to play BF2.
|
|
|
|
Joined: Sep 2006
Posts: 3,983
3000 Post Club Member
|
3000 Post Club Member
Joined: Sep 2006
Posts: 3,983 |
The bass strings may be coming close to the end of their life span, and the two strings are no longer sounding the same, i.e. their partial content is different. If you tune the fundamental to be in tune, the partials sound out of tune and vice versa. Probably time for new bass strings, all across the board, or at least both strings of the offending unison. No doubt it won't be long until other unisons follow suit.
JG
|
|
|
|
Joined: Apr 2009
Posts: 411
Full Member
|
Full Member
Joined: Apr 2009
Posts: 411 |
Maybe one of the strings was replaced in the past instead of replacing both strings with a matched pair. I've seen this but you can usually see that one string is shinier than the other or the coil is ugly.
|
|
|
|
Joined: Nov 2010
Posts: 5,998
5000 Post Club Member
|
5000 Post Club Member
Joined: Nov 2010
Posts: 5,998 |
2ndly, one should never tune pianos only using a machine. Your ears should be trained to be able to know what is right and what is wrong. In this case, apparently, you cannot tell the difference enough to know so, you trust the machine instead of your ears.
Jerry, I read this quite differently. It seems to me that the OP is trusting his ears and is just confused by his machine. He is trusting his ears enough to come up with an estimation that his machine is about 10cents off in the way it measures this note. Obviously there is some strange inharmonicity in one of these strings which the machine is measuring. But the OP certainly seems to be very able to hear where it should be and has corrected it thusly. He just seems to lack some confidence in disregarding the machine and trusting his judgement in the case of such anomalies.
|
|
|
|
Joined: Nov 2007
Posts: 6,828
6000 Post Club Member
|
6000 Post Club Member
Joined: Nov 2007
Posts: 6,828 |
HI Ando, You could be right. I maybe mis-reading it. Tuning 2 strings 10 cents a part to make them match one another, is a very large difference. Either that decision is right, or, it is wrong. There is no gray area here. I've encountered more than my fair share of false beats, strings that were mismatched and much more in the past 38 years of full time tuning. In my opinion, if the OP could truly hear it with his ears, he would know the answer to the question. He would know if it was actually in tune or not without the machine or with guesswork.. It could still, possibly be something other than worn out wires etc. It could be a bobbling hammer or the one hammer could be hitting the wrong strings. We really don't know from here.
Jerry Groot RPT Piano Technicians Guild Grand Rapids, Michigan www.grootpiano.comWe love to play BF2.
|
|
|
|
Joined: Aug 2011
Posts: 2,925
2000 Post Club Member
|
2000 Post Club Member
Joined: Aug 2011
Posts: 2,925 |
Could your scope be misreading the overtones? Often the etd's read the upper partials of the bass strings. A reading of 10% difference at the 3-4 partials of lower bass notes would not be a big surprise.
"Imagine it in all its primatic colorings, its counterpart in our souls - our souls that are great pianos whose strings, of honey and of steel, the divisions of the rainbow set twanging, loosing on the air great novels of adventure!" - William Carlos Williams
|
|
|
|
Joined: Oct 2004
Posts: 2,456
2000 Post Club Member
|
2000 Post Club Member
Joined: Oct 2004
Posts: 2,456 |
Bass bridges are often notched so that the bass bichords have equal lengths.
Straight bass bridges, cut straight cause bichords to be slightly unequal in length. We accept that on a great many pianos.
Yamaha, back in the time of the piano the OP mentions, notched the bass bridge such that it accentuated the unequal length of the bichords. These are problematic when tuning the bichords.
|
|
|
|
Joined: Nov 2006
Posts: 8
Junior Member
|
OP
Junior Member
Joined: Nov 2006
Posts: 8 |
Thank you everyone for your opinions! It seems that the bass strings are having the same color without one looks shinier than the other and the hammer is striking at the correct strings. I guess it could be due to the strings itself. I have encountered another similar problem in an old piano and this does not happen to new pianos.
|
|
|
|
Joined: Mar 2008
Posts: 4,263
4000 Post Club Member
|
4000 Post Club Member
Joined: Mar 2008
Posts: 4,263 |
One of the strings could be a replacement string. If that is the case then you will never get them to tune up equally.
|
|
|
|
Joined: Nov 2007
Posts: 6,828
6000 Post Club Member
|
6000 Post Club Member
Joined: Nov 2007
Posts: 6,828 |
Dan, I was just thinking that exact same thing myself. Good thought!
Jerry Groot RPT Piano Technicians Guild Grand Rapids, Michigan www.grootpiano.comWe love to play BF2.
|
|
|
|
Joined: Mar 2008
Posts: 4,263
4000 Post Club Member
|
4000 Post Club Member
Joined: Mar 2008
Posts: 4,263 |
Agreed Jerry, I didn’t think of that until the OP mentioned the difference in colour of the two strings. This was brought up by another Dan a few days back and we all missed it…here; Maybe one of the strings was replaced in the past instead of replacing both strings with a matched pair. I've seen this but you can usually see that one string is shinier than the other or the coil is ugly.
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
Yamaha bass strings are sounding dull and cardboard like (for lack of better term) often after only 5 years, I was told it possibly was due to their machine winding inclueding some sort of resin of the core.
Anyway trading them for a set of Hellerbass on a C5 C7 is a good idea and will allow for a nicer tone. (Thanks Gregor for your bankcheck !)
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: May 2012
Posts: 502
500 Post Club Member
|
500 Post Club Member
Joined: May 2012
Posts: 502 |
Check to see if it is the last pair of strings on the base bridge. I have found and also read on Piano World that this is a problem site. I've even checked it on a brand new small piano and noticed same effect. As mentioned make certain that the hammer is touching both strings at the same instant.
|
|
|
|
Joined: Sep 2011
Posts: 332
Full Member
|
Full Member
Joined: Sep 2011
Posts: 332 |
Replace both strings and tune them aurally.
|
|
|
Piano
by Gino2 - 04/17/24 02:34 PM
|
Piano
by Gino2 - 04/17/24 02:23 PM
|
|
|
|
|
Forums43
Topics223,405
Posts3,349,434
Members111,637
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|