Welcome to the Piano World Piano Forums
Over 2.5 million posts about pianos, digital pianos, and all types of keyboard instruments
Join the World's Largest Community of Piano Lovers (it's free)
It's Fun to Play the Piano ... Please Pass It On!

Gifts and supplies for the musician

Schumann's 4th Finger
Schumann's 4th Finger Enigma Resolved
Piano Life Saver - Dampp Chaser
Dampp Chaser Piano Life Saver
Modern Piano Moving
Modern Piano Moving
Piano Buyer Guide
Piano Buyer Spring 2017
Lindeblad Piano
Lindeblad Piano Restorations and sales
Sanderson Accu-Tuner
Who's Online
131 registered (7uturu, ajames, anamnesis, Almaviva, 24 invisible), 2217 Guests and 11 Spiders online.
Key: Admin, Global Mod, Mod
Estonia Pianos
Estonia Pianos
Quick Links to Useful Piano & Music Resources
Our Classified Ads
Find Piano Professionals-

*Piano Dealers - Piano Stores
*Piano Tuners
*Piano Teachers
*Piano Movers
*Piano Restorations
*Piano Manufacturers

Quick Links:
*Advertise On Piano World
*Free Piano Newsletter
*Online Piano Recitals
*Piano Recitals Index
*Piano & Music Accessories
*Live Piano Venues
*Music School Listings
* Buying a Piano
*Buying A Acoustic Piano
*Buying a Digital Piano
*Pianos for Sale
*Sell Your Piano
*How Old is My Piano?
*Piano Books
*Piano Art, Pictures, & Posters
*Directory/Site Map
*Virtual Piano
*Music Word Search
*Piano Screen Saver
*Piano Videos
*Virtual Piano Chords
Topic Options
#1805831 - 12/14/11 03:45 AM Kurzweil PC88: Fatar key assembly question
1976pianoman Offline
Junior Member

Registered: 08/21/10
Posts: 17
Loc: Northridge, CA

I'm wondering if the TP 10 in the PC88 can be replaced with the TP 40? I presume the TP 40 is better? I've never played it.

I have a PC88 that I am expecting to have key trouble with sometime soon. I know what the life span is of the TP10 and this one is near the end.

Does Fatar even make the TP10 anymore? Can I still get it?

Finally what is the terminology for replacing only the hammer assembly below the keys. Is that the "key assembly" or does the "key assembly" include the keys as well?

Thank you.


Click Here

#1806324 - 12/14/11 09:41 PM Re: Kurzweil PC88: Fatar key assembly question [Re: 1976pianoman]
PossumES8SP280 Offline
500 Post Club Member

Registered: 08/23/10
Posts: 726

I would contact them, but I am not sure if they only sell bulk to manufacturers.

I had the action in my Fatar Studio-900 which I kept from 1997 to end of last year. It was very similar to a PC88 when I had it hooked up to my micropiano module.

It defintely felt different at the end, almost as if it was decaying and it felt louder. I enjoyed using it with my piano modules, but felt ready to get something all inclusive.
Roland Juno Gi
Casio PX-130
Korg Krome 61
Korg SP280
Kawai ES8
Rokit KRK 6 monitors
MXL V67G microphone

#1806415 - 12/15/11 02:45 AM Re: Kurzweil PC88: Fatar key assembly question [Re: 1976pianoman]
LesCharles73 Offline
500 Post Club Member

Registered: 03/24/07
Posts: 744
Loc: Denton Texas
Good luck getting in touch with Fatar. Might try calling Sweetwater instead.

I don't believe the Fatar TP-10 is available anymore. The original had lead in the hammers, so they became "illegal". Doesn't make a ton of sense to me since lead is still manufactured and sold for other purposes, but what can ya do. The lead was inside the hammers under the keys -- inaccessible during normal use, FWIW.

The K2500X/S has this same action. You really have to search for used or new-old stock to find replacements.

Kind of a rabbit trail, but...
I believe the K2600X/S uses the TP-10MDF action. There are some differences, one being the underside of the key. The "finger" arrangement (which pivots the hammer) is different. Also, I believe the lead was replaced with steel. The K2600X/S action should work, however, Fatar no longer makes this model action either, and the likes of Sweetwater and Kurzweil can't even get a replacement key for any older PC or K series board. Same case for older SP series pianos. Basically, unless you have a current model Kurzweil, you can't get action parts for it. I found a parted out K2600X and hoarded a set of keys, but lack hammers. No problems yet... We'll see. The PC88 and K2500 hammers were very weak, but my K2600 seems fine after about 12 years. Anyway, I'm rambling and somewhat off the subject.

To address your actual question, I don't think the TP-40 action would work. Mechanically, it would probably fit, but I have heard an account of someone dropping a TP-40 in to their K2600X, which as stated above, is designed for the TP-10MDF. The result was mismatched velocity readings between the black and white keys. The processor just wasn't designed to handle the differing signals the keyswitches were sending. I don't think there was a fix for this. Maybe you could pull the TP-40 sensors out and put in TP-10 sensors -- I don't know. Most Fatar keyswitches are the same (two long circuit boards), but I wouldn't say 'all', because I have only been inside a few versions of Fatar actions. There's also the fact that if you were to get a new action from Fatar by some miracle, it would cost several hundred dollars. Unless you are completely in love with your PC-88, it wouldn't make sense economically. I know how you feel though -- I will one day face the same dilemma with my beloved K2600X. I'll probably save for whatever Kurzweil's best workstation is at the time, but I will still hate parting with it. Especially if it's just the keys that are worn out and otherwise looks/works like new (as in its present state).

"Key assembly" or "Key bed" generally describes the entire assembly -- keys, hammers, sensors and all. Note that there is no "hammer assembly". They are all independent hammers which attach to the key frame (which is essentially the key bed) using a metal rod which passes through their fulcrums. It's kind of like a Rubics cube in that you can't just take one out [or all in one piece] and that they are not a system separate from the keys. Once they're installed, they're integrated. The whole system has to come apart piece-by-piece and then what you have is a pile of keys, a pile of hammers, a pile of tension springs, and then this long metal frame which they all attached to. If you order a "counterweight set" (good luck on that too smirk ) you will likely get a set of 88 counterweights, which are basically these plastic blocks with metal inside that are shaped kind of like Tennessee. They have felt on one side and a hole near one end -- really pretty simple. Heck you could probably have some milled out of aluminum. It'd change the feel (maybe for the better?), but they would last for-freakin-ever! Really the individual hammers and a thin metal rod is all that there is to the weighted hammer mechanism. No 'assembly' per se, as they become part of the final key assembly/key frame/key bed/whatchacallit.

Hope this helps. Sorry for all the over-descriptive writing. If you have any specific questions or descriptions, let me know!

As far as I know, the TP-40 IS better -- better feel and no reliability issues that I've heard of. Second-hand knowledge of course.

Edited by LesCharles73 (04/20/12 12:36 AM)
Les C Deal


Moderator:  Piano World 
Pearl River
Pearl River Pianos
What's Hot!!
New Forums Location & New Piano World Site
Why Do You Play The Piano?
Posting Pictures on the Forums
on Piano World

Piano Classified Ads
Pierce Piano Atlas

Sweetwater Hiring Keyboard Player!
Sweetwater Hiring Keyboard Player
Grotrian Concert
for Pianoteq out now
A. Geyer Pianos
A. Geyer Pianos
Piano Acc. & Gift Items in
Piano World's Online Store
In PianoSupplies.com ,(a division of Piano World) our online store for piano and music gifts and accessories, party goods, tuning equipment, piano moving equipment, benches, lamps Caster Cups and more.

Piano Wire Music Wire Piano Strings

Free Shipping on Jansen Artist Piano Benches
New Topics - Multiple Forums
The best ever Rach 3?
by bennevis
57 minutes 20 seconds ago
Will Cory's Piano Polish help restore this?
by cactus_prime
Today at 01:01 PM
What might cause a piano to echo?
by impendia
Today at 12:40 PM
Need help with special needs
by chasingrainbows
Today at 12:05 PM
When Do Dampers Start to Lift During Key Travel?
by SonatainfSharp
Today at 11:42 AM
Sheet Music Plus
Sheet Music Plus Featured Sale
Forum Stats
87,493 Registered Members
44 Forums
179,178 Topics
2,618,720 Posts

Most users ever online: 15,252 @ 03/21/10 11:39 PM

Visit our online store for gifts for music lovers

Help keep the forums up and running with a donation, any amount is appreciated!
Or by becoming a Subscribing member! Thank-you.
Donate   Subscribe
Our Piano Related Classified Ads
Dealers | Tuners | Lessons | Movers | Restorations | Pianos For Sale | Sell Your Piano |

Advertise on Piano World
| Subscribe | Piano World | PianoSupplies.com | Advertise on Piano World |
| |Contact | Privacy | Legal | About Us | Site Map | Free Newsletter |

copyright 1997 - 2017 Piano World ® all rights reserved
No part of this site may be reproduced without prior written permission