|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
67 members (BillS728, Burkhard, aphexdisklavier, bobrunyan, anotherscott, AaronSF, apianostudent, 19 invisible),
2,249
guests, and
373
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Sep 2010
Posts: 5
Junior Member
|
OP
Junior Member
Joined: Sep 2010
Posts: 5 |
So here's another question from a newcomer to piano playing and piano buying prompted by the insightful and thought provoking comments of a member here. I've been looking at pianos in the $8-10K price range. At that point I am considering good uprights, smaller grands, and used instruments. My question may apply to all of these but is directed more at the latter two categories where quality might vary more. Being an instrument, I agree that the first requirements are in tone and touch. Does it sound and feel good? Does it convey or even elicit the musical ideas of the player? Let's say the answer to both of these is "yes." Now what? How do I know the instrument will continue to do so for years to come and, if maintained well, stand the test of time? Here are some things I'm wondering: 1) How indicative are a good touch and tone of a piano that is otherwise constructed well? 2) Are cabinet details like a slow close fallboard, sturdy legs and lyre, or thick lid prop demonstrative of a quality piano that should maintain it's tone and blossom over time? 3) Is the reverse true? That is, if a piano locks such attention to detail, will it likely encounter more problems even in other areas and degrade in tone or action? 4) Do such identifiable qualities exist? Upon inspection of a new piano, could a piano buyer or tech say with reasonable confidence that it will last? 5) How much weight is placed on brand and country of origin? What do you do if there is little track record? 6) Are there any details on the spec sheet that should indicate quality? How do you weigh the materials as compared to design and construction methods? (from the extensive thread on rim construction and laminated soundboards: http://www.pianoworld.com/forum/ubbthreads.php/topics/1479194/1.html ) I'm curious how others have approached this and what you recommend.
|
|
|
|
Joined: Jun 2003
Posts: 32,060
Yikes! 10000 Post Club Member
|
Yikes! 10000 Post Club Member
Joined: Jun 2003
Posts: 32,060 |
There are very few new pianos available now which are poor quality. They might be in some stores as loss leaders designed to get you into the store, but these days few stores can afford to do that.
If you want to buy a piano that will last you a long time, your best bet may be to shop for a good piano technician to advise you. That person is the one who will insure that your piano will be pleasing for the longest time.
Semipro Tech
|
|
|
|
Joined: Feb 2010
Posts: 304
Full Member
|
Full Member
Joined: Feb 2010
Posts: 304 |
At this level, you might well benefit from the used market, and be advised to research/ask friends about piano technicians to travel with you to check out your candidates for purchase. Used will buy you lots more piano for the money. You might find some for, say, $7,500 which need $500 or $1,000 in work that the seller couldn't afford, and the piano would then be in great shape for decades. You might find one for $9,000 that has had work in the last 10 years but the owner is downsizing into a condo. The possibilities, especially if you're willing to travel a few hundred miles, are almost endless. Good luck and have enjoyment!
|
|
|
|
Joined: Apr 2010
Posts: 2,326
2000 Post Club Member
|
2000 Post Club Member
Joined: Apr 2010
Posts: 2,326 |
One very broad but quite accurate indicator of piano quality/value is content -- as measured by weight.
It's really very simple -- material costs money and manufacturers won't spend the money for the material in a lower quality instrument that can't justify its price in the market. Conceivably, better pianos will require greater investment in design and they won't pay for as much design effort on a cheap piano, either.
Weight is also directly related to size and it always helps to have the laws of physics on your side. Again, this is painting with a broad brush, but a 7' piano of any brand is likely to be better than a 4'7" piano of any other brand -- and certainly better than upright models.
Under no circumstances should you pay attention to the special names for given engineering features or treatments like "Synchrotone Bass Strings" or "Thermoneal Stabilisor Treatments" or "Tension Resonators" or "Accelerated Action" or any of the rest. Quality is not dependent on individual engineering solutions but rather on the totality of how all the solutions are wedded together into a unified performing instrument. This is not to say that a given feature may have its merits but rather that the presence or absence of any given feature does not establish a quality piano.
Another thing you'll find is that there is considerable parallel between quality and price -- particularly within given families or classes of piano.
However, rather than looking for the magic principle that will spare a person the effort of thinking, the best thing to do is simply to expend the effort to become educated about what pianos are, what they can do and what prices are by just going out and playing a lot of new and used pianos. Eventually, you'll trust your own ears and fingers.
For help in selection, you might engage a qualified technician to examine the internal workings and structural condition. I wouldn't bring along another musician or teacher because you are getting the piano for yourself, not them, and they tend to be a good source for misinformed lore. A technician can also help you sort out whether a particular negative feature (slow action, for example) is intrinsic to the piano or can be corrected and if so, whether for major or minor expense.
Good luck in your search!
Keith Akins, RPT Piano Technologist USA Distributor for Isaac Cadenza hammers and Profundo Bass Strings Supporting Piano Owners D-I-Y piano tuning and repair editor emeritus of Piano Technicians Journal
|
|
|
|
Joined: Mar 2007
Posts: 1,103
1000 Post Club Member
|
1000 Post Club Member
Joined: Mar 2007
Posts: 1,103 |
1) How indicative are a good touch and tone of a piano that is otherwise constructed well? 2) Are cabinet details like a slow close fallboard, sturdy legs and lyre, or thick lid prop demonstrative of a quality piano that should maintain it's tone and blossom over time? 3) Is the reverse true? That is, if a piano locks such attention to detail, will it likely encounter more problems even in other areas and degrade in tone or action? 4) Do such identifiable qualities exist? Upon inspection of a new piano, could a piano buyer or tech say with reasonable confidence that it will last? 5) How much weight is placed on brand and country of origin? What do you do if there is little track record? 6) Are there any details on the spec sheet that should indicate quality? How do you weigh the materials as compared to design and construction methods? (from the extensive thread on rim construction and laminated soundboards: http://www.pianoworld.com/forum/ubbthreads.php/topics/1479194/1.html ) I'm curious how others have approached this and what you recommend. 1:) I don't understand your question 2:) No. Slow close etc. are marketing features found on entry level pianos. They indicate nothing of the piano, nor do the other things you mention 3:) No 4:) No 5:) Brand is important. Country of origin may or may not mean anything in your price range. 6:) The longer the 'spec' sheet, and the more often it says "German", usually the cheaper the piano. As BDB says, you need an advisor, and you also need to look and try a lot of pianos. Take care Stev
|
|
|
|
Joined: Mar 2008
Posts: 4,263
4000 Post Club Member
|
4000 Post Club Member
Joined: Mar 2008
Posts: 4,263 |
This is the incorrect question to ask. The person who assesses/investigates the quality of an instrument is the person with years of experience in the piano trade you hire to do the assessment for you. The correct question is; How do I asses the quality of the technician I hire to appraise the instrument I am interested in? And this question has also been answered in a previous posting: If you want to buy a piano that will last you a long time, your best bet may be to shop for a good piano technician to advise you. That person is the one who will insure that your piano will be pleasing for the longest time.
|
|
|
|
Joined: Sep 2003
Posts: 5,534
5000 Post Club Member
|
5000 Post Club Member
Joined: Sep 2003
Posts: 5,534 |
One very broad but quite accurate indicator of piano quality/value is content -- as measured by weight.
It's really very simple -- material costs money and manufacturers won't spend the money for the material in a lower quality instrument that can't justify its price in the market. Conceivably, better pianos will require greater investment in design and they won't pay for as much design effort on a cheap piano, either.
Weight is also directly related to size and it always helps to have the laws of physics on your side. Again, this is painting with a broad brush, but a 7' piano of any brand is likely to be better than a 4'7" piano of any other brand -- and certainly better than upright models. I think a good argument could be made that the opposite is true. For example, most folks would probably prefer a piano with a lid they can actually lift without asking Arnold Schwarzenegger for assistance. A lid built cheaply and simply out of MDF does give a flat surface on which to build a nice, thick “mirror-like†polyester finish but it will be heavy and will sag over time if left in the up position. Just because that lid is heavy does not mean it is a high-quality component. A well-engineered lid—such as those often seen a century or so back—could weigh half as much and remain straight and true even if left in the up position for long periods of time. The soft-fall mechanism has now become an essential sales feature primarily because the key covers are now universally made of thick, massive, MDF. The modern keycover is so bloody heavy that dropping one on one’s hand may well break a finger or two. So, does the presence of the soft-fall mechanism really represent high quality? Or is it an indicator that the keycover is of such low-quality that this mechanism is necessary to compensate? Another example is the frame (or plate) of the so-called “modern†piano. Even a poorly designed and engineered frame can be made stable and acoustically acceptable if enough iron is thrown at it. It takes both better design and better engineering to achieve good stability and acoustic performance using, say, one-third less iron. So, is the massive frame, with its thick cross-sections really an indicator or quality? Or is it a sign of poor design that is being masked by all that extra iron? There are many ways for the creative designer and/or engineer to start the piano on a long past due diet. In my humble opinion it is long past time for piano makers to be looking for ways to design and engineer smaller (though not necessarily shorter) and lighter pianos while at the same time improving their aesthetics and performance. At its best design will do all of these things. It is becoming increasingly important, as societies increasingly outstrip the planet’s ability to renew resources, to use careful design to achieve higher levels of performance while at the same time utilizing fewer, and more readily renewable, resources. I believe there will be a waiting market for the first piano maker that makes these things a priority and gives the market some real, substantive choices. (The fact that I already have some of these designs in my computer, of course, has no bearing on the opinions expressed in the above post….) ddf
Delwin D Fandrich Piano Research, Design & Manufacturing Consultant ddfandrich@gmail.com (To contact me privately please use this e-mail address.)
Stupidity is a rare condition, ignorance is a common choice. --Anon
|
|
|
|
Joined: Sep 2004
Posts: 2,188
2000 Post Club Member
|
2000 Post Club Member
Joined: Sep 2004
Posts: 2,188 |
There are very few new pianos available now which are poor quality. They might be in some stores as loss leaders designed to get you into the store, but these days few stores can afford to do that.
If you want to buy a piano that will last you a long time, your best bet may be to shop for a good piano technician to advise you. That person is the one who will insure that your piano will be pleasing for the longest time. I would argue, however, that there are many pianos available with poor tone.
|
|
|
|
Joined: Jan 2003
Posts: 19,862
Yikes! 10000 Post Club Member
|
Yikes! 10000 Post Club Member
Joined: Jan 2003
Posts: 19,862 |
interesting points Del.
how does the uninformed customer assess quality tho? what should they look for?
accompanist/organist.. a non-MTNA teacher to a few
love and peace, Õun (apple in Estonian)
|
|
|
|
Joined: May 2001
Posts: 11,199
Yikes! 10000 Post Club Member
|
Yikes! 10000 Post Club Member
Joined: May 2001
Posts: 11,199 |
I agree that a well-qualified, INDEPENDENT technician can be used to predict the likely stability and longevity of a piano.
Another factor that can be used is the track record of the manufacturer. If there is a long track record one can read the history of the company (in Piano Buyer, of course), and ascertain the consistancy, or lack there of, of the brand over time.
The fact that the top tier's brands have been making top quality pianos consistently for many years speaks to the arguement that new ones, with similar construction, will also stand the test of time. The same can be said, for the most part, of Yamaha and Kawai.
Piano Industry Consultant
Co-author (with Larry Fine) of Practical Piano Valuation www.jasonsmc@msn.com
Contributing Editor & Consultant - Acoustic & Digital Piano Buyer
Retired owned of Jasons Music Center Maryland/DC/No. VA Family Owned and Operated Since 1937.
|
|
|
|
Joined: Mar 2006
Posts: 16,105
Yikes! 10000 Post Club Member
|
Yikes! 10000 Post Club Member
Joined: Mar 2006
Posts: 16,105 |
In my view, paying an expert a nominal fee for an unbiased professional opinion/recommendation on finding and buying a quality piano at a fair market price would be money well spent. There are some piano professionals who are members of this forum, Del for one, whom I would be glad to pay to help me find a high quality piano at a fair price. I believe this is what they call consulting or brokering.
The expert would need to be someone that you trust totally. With all due respect to dealers, they are not usually unbiased when it comes to selling you one of their quality pianos, though they might feel they have the customer’s best interest in mind and the best pianos in the world.
Often, the experts in question also have pianos they want to sell. So, that leaves the pool of experts who may be totally and unequivocally unbiased very limited.
As Apple mentioned, it is up to the consumer or piano shopper to do their homework, as much as they can, in order to make an informed choice… not necessarily an easy task.
The bottom line is, there is always some risk involved in buying a piano since we don’t live in a perfect world and there is not a perfect piano.
Just my .02…
Rick
Piano enthusiast and amateur musician: "Treat others the way you would like to be treated". Yamaha C7. YouTube Channel
|
|
|
|
Joined: Jun 2007
Posts: 599
500 Post Club Member
|
500 Post Club Member
Joined: Jun 2007
Posts: 599 |
you need years of experience and a musical ear.
Max di Mario
|
|
|
|
Joined: Apr 2005
Posts: 3,546
3000 Post Club Member
|
3000 Post Club Member
Joined: Apr 2005
Posts: 3,546 |
Great post, Del! real food for thought there and an antidote to the constant barrage of "more must be better" PR!
Thank you!!
Sophia
|
|
|
|
Joined: Mar 2008
Posts: 784
500 Post Club Member
|
500 Post Club Member
Joined: Mar 2008
Posts: 784 |
1)Touch and tone are not indicators specially if you don't have experience. The average new piano can be prep to have fairly good touch and tone at least temporarily.
2)The cabinet can tell you quite a bit about the quality if you know what to look for and where.
3)Detail and quality it is not the same. Steinway's are not well detailed but they are high quality.
4)Those qualities exits but they are not easy to identify; for example the quality of the bushings, knuckles, cabinet joints, hardware, glues, notching of the bridge, the design of the soundboard system. an average piano buyer can't tell the difference a experience tech yes.. Look out a said a tech not a piano tuner or somebody in the process of learning.
5) Because you can turn into an expert in order to buy; I will put a lot weight in the brand name, history, consumer rating, model and resale value. Off course somebody here will tell you otherwise because ALL OF US have a "stencil brand" to sell or a price point baby grand under 10K therefore these kind of statement doesn't help their cause.
6) Don't bother you'll go crazy; this why is answer number 5 is valuable. As I said don't push the envelope; there is not such a thing as a great baby-grand for less than 10K this is a budget for a very good upright.
Last edited by Kurtmen; 09/15/10 06:45 PM.
|
|
|
|
|
|
Piano
by Gino2 - 04/17/24 02:34 PM
|
Piano
by Gino2 - 04/17/24 02:23 PM
|
|
Forums43
Topics223,408
Posts3,349,457
Members111,637
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|