|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
76 members (AaronSF, apianostudent, beeboss, brdwyguy, benkeys, Abdulrohmanoman, accordeur, 17 invisible),
2,263
guests, and
436
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Mar 2004
Posts: 724
500 Post Club Member
|
OP
500 Post Club Member
Joined: Mar 2004
Posts: 724 |
Well I used my durometer. It's scale says "Shore A-2" not just "Shore A". I am not yet sure of the difference.
In the base the hammer felt on the side (equator?)is 85, the felt near the striking point is 90. In the treble it is 80 and 85 at the tip.
I will report back on my buddies' 1935 M&H.
My tech says the old Steinways had brilliant tone yet the hammers were spongy when you squeezed them. This is certainly different from the Grotrian Abel's where they are really hard!
Anybody else have any hammer information?
Regards,
Grotriman
|
|
|
|
Joined: May 2001
Posts: 1,731
1000 Post Club Member
|
1000 Post Club Member
Joined: May 2001
Posts: 1,731 |
G Ironic, but I checked a set of Abels just today.
This was a raw unmounted set and there were 94 hammers in the set and I just checked the strike point.
They ran a consistant increase from 84.3 on #1 to 98.0 on #94. There was one that was wild, #30 was 88.0, #40 was 90.6 but #35 was 83.9, other than this one immaculately consistant.
lb
|
|
|
|
Joined: Mar 2004
Posts: 724
500 Post Club Member
|
OP
500 Post Club Member
Joined: Mar 2004
Posts: 724 |
lb,
Please regard your measurements as much more accurate than mine as my action was lying in my lap and I was struggling to balance everything and take the measurement.
Regards,
Grotriman
|
|
|
|
Joined: May 2001
Posts: 1,731
1000 Post Club Member
|
1000 Post Club Member
Joined: May 2001
Posts: 1,731 |
G
You have to stroke with whatever tools you can.
This piano company lets me come in and piddle around in their R&D dept on Saturday mornings when I am in town.
I was curious about the consistancy of their hammer supply and pulled one set out of a batch and tested it. Their equipment is a little better than mine in my shop.
lb
|
|
|
|
Joined: Sep 2003
Posts: 5,534
5000 Post Club Member
|
5000 Post Club Member
Joined: Sep 2003
Posts: 5,534 |
Originally posted by lb: G Ironic, but I checked a set of Abels just today.
This was a raw unmounted set and there were 94 hammers in the set and I just checked the strike point.
They ran a consistant increase from 84.3 on #1 to 98.0 on #94. There was one that was wild, #30 was 88.0, #40 was 90.6 but #35 was 83.9, other than this one, immaculately consistant.
lb Unfortunately these numbers tell us very little about the tonal performance of the hammer. During my hammermaking experiments a few years back we tried to come up with a way to measure Shore hardness that would help us predict the tone quality and harmonic spectrum we could expect from a given set of hammers. But to no avail. The problem is that a Shore Durometer measures only surface hardness whereas the tonal characteristic of the hammer depends on a complex mix of characteristics that are most closely related to an elusive mass/resilience ratio. The closest we came to was with a modified Resiliometer. The hammer would be thrown at a taut string with a given velocity and we then attempted to measure the return, or rebound, velocity. The difference figure gave us what we called a ‘rebound factor.’ Unfortunately the project was terminated before we learned much of any real value from it. Well, we learned a lot but the elusive tone predictor remained elusive. Del
Delwin D Fandrich Piano Research, Design & Manufacturing Consultant ddfandrich@gmail.com (To contact me privately please use this e-mail address.)
Stupidity is a rare condition, ignorance is a common choice. --Anon
|
|
|
|
Joined: Jan 2002
Posts: 1,969
1000 Post Club Member
|
1000 Post Club Member
Joined: Jan 2002
Posts: 1,969 |
Originally posted by Del: Originally posted by lb: [b] Unfortunately these numbers tell us very little about the tonal performance of the hammer.
During my hammermaking experiments a few years back we tried to come up with a way to measure Shore hardness that would help us predict the tone quality and harmonic spectrum we could expect from a given set of hammers. But to no avail. The problem is that a Shore Durometer measures only surface hardness whereas the tonal characteristic of the hammer depends on a complex mix of characteristics that are most closely related to an elusive mass/resilience ratio. The closest we came to was with a modified Resiliometer. The hammer would be thrown at a taut string with a given velocity and we then attempted to measure the return, or rebound, velocity. The difference figure gave us what we called a ‘rebound factor.’ Unfortunately the project was terminated before we learned much of any real value from it. Well, we learned a lot but the elusive tone predictor remained elusive.
Del [/b]Del, Wouldn't the amount of bearing, combined with the belly assemblies ability to distribute and maintain energy also play a critical role in the character of its sound? I feel that the hammer plays an important but finite role in the tonal character of the instrument. Am I barking up the wrong tree?
Blüthner USA, LLC
|
|
|
|
Joined: Sep 2003
Posts: 5,534
5000 Post Club Member
|
5000 Post Club Member
Joined: Sep 2003
Posts: 5,534 |
Originally posted by Alex Hernández: Del,
Wouldn't the aount of bearing, combined with the belly assemblies ability to distribute and maintain energy also play a critical role in the character of sound?
I feel that the hammer plays an important but finite role in the tonal character of the instrument. Am I barking up the wrong tree? Yes, of course. But the object of tests like these are to isolate the effect of just one component. In this case the hammer. It does little good to attempt any real understand the whole if we cannot understand the performance of the individual components. Del
Delwin D Fandrich Piano Research, Design & Manufacturing Consultant ddfandrich@gmail.com (To contact me privately please use this e-mail address.)
Stupidity is a rare condition, ignorance is a common choice. --Anon
|
|
|
|
Joined: May 2001
Posts: 1,731
1000 Post Club Member
|
1000 Post Club Member
Joined: May 2001
Posts: 1,731 |
Well the almighty one has addressed me. I am in awe.
Del,I thought you said at one point that you wouldn't dignify my existence by addressing me, or words to that effect.
lb
|
|
|
|
Joined: Jan 2002
Posts: 1,969
1000 Post Club Member
|
1000 Post Club Member
Joined: Jan 2002
Posts: 1,969 |
Originally posted by Del: Originally posted by Alex Hernández: [b] Del,
Wouldn't the amount of bearing, combined with the belly assemblies ability to distribute and maintain energy also play a critical role in the character of sound?
I feel that the hammer plays an important but finite role in the tonal character of the instrument. Am I barking up the wrong tree? Yes, of course. But the object of tests like these are to isolate the effect of just one component. In this case the hammer. It does little good to attempt any real understand the whole if we cannot understand the performance of the individual components.
Del [/b]Well that makes perfect sense. But why would one assume that a complete sense of tonal performance be achieved by isolating this component from the the other components that contribute to its overall character? In the end doesn't the hammer introduce energy and establish the excursion of the string? It's elasticity and density determine how it does this. The rest of the story is written by the bridge/board/rim relationship. I suppose the point I was making was that the harmonic spectrum of the hammer is also a reflection of these related components, is it not?
Blüthner USA, LLC
|
|
|
|
Joined: Jan 2003
Posts: 1,810
1000 Post Club Member
|
1000 Post Club Member
Joined: Jan 2003
Posts: 1,810 |
Women laugh at you guys, you know.
;-)
Rick Clark
Rick Clark
Piano tuner-technician
|
|
|
|
Joined: May 2001
Posts: 1,731
1000 Post Club Member
|
1000 Post Club Member
Joined: May 2001
Posts: 1,731 |
Rick
Anything for a laugh, but are you sure just women?
Damn, I was just conducting a simple QC test to check the consistency of a supplier to the manufacturers specifications. I wasn't trying to part the Red Sea in the evolution of the piano.
lb
|
|
|
|
Joined: Mar 2004
Posts: 724
500 Post Club Member
|
OP
500 Post Club Member
Joined: Mar 2004
Posts: 724 |
Originally posted by Alex Hernández: Originally posted by Del: [b] Originally posted by Alex Hernández: [b] Del,
Wouldn't the amount of bearing, combined with the belly assemblies ability to distribute and maintain energy also play a critical role in the character of sound?
I feel that the hammer plays an important but finite role in the tonal character of the instrument. Am I barking up the wrong tree? Yes, of course. But the object of tests like these are to isolate the effect of just one component. In this case the hammer. It does little good to attempt any real understand the whole if we cannot understand the performance of the individual components. Del [/b] Well that makes perfect sense. But why would one assume that a complete sense of tonal performance be achieved by isolating this component from the the other components that contribute to its overall character?
In the end doesn't the hammer introduce energy and establish the excursion of the string? It's elasticity and density determine how it does this. The rest of the story is written by the bridge/board/rim relationship.
I suppose the point I was making was that the harmonic spectrum of the hammer is also a reflection of these related components, is it not? [/b]Alex, In any multivariable system where one is trying to improve the overall result, you hold all variables constant save one and try to determine the improvement by varying that one. Then move to the next variable. Is that what you are asking? Of course where the variables interact, this approach may or may not work based on the level of interaction.
Regards,
Grotriman
|
|
|
|
Joined: Sep 2003
Posts: 5,534
5000 Post Club Member
|
5000 Post Club Member
Joined: Sep 2003
Posts: 5,534 |
Originally posted by lb: Well the almighty one has addressed me. I am in awe.
Del,I thought you said at one point that you wouldn't dignify my existence by addressing me, or words to that effect.
lb No, I don't think so. If memory serves you were making a real issue of certain manufacturers and/or distributors hiding behind names that have nothing to do with who it is actually building them. I was simply trying to make the point that piano makers are not the only ones hiding behind misleading or meaningless names. I think it is nice to know who one is dealing with whether that happens to be a pianomaker or someone on the internet. I think a lot of nastiness would be avoided if folks were required to sign their real names to the stuff they write. Sorry if this offends you. Del
Delwin D Fandrich Piano Research, Design & Manufacturing Consultant ddfandrich@gmail.com (To contact me privately please use this e-mail address.)
Stupidity is a rare condition, ignorance is a common choice. --Anon
|
|
|
|
Joined: Mar 2004
Posts: 724
500 Post Club Member
|
OP
500 Post Club Member
Joined: Mar 2004
Posts: 724 |
Del,
The reason I posted the hardness was that someone in another thread asked for the numbers.
BTW are these numbers (85-90) typical in other hammers? Or are they unique to Abels?
Regards,
Grotriman
|
|
|
|
Joined: Jun 2003
Posts: 32,060
Yikes! 10000 Post Club Member
|
Yikes! 10000 Post Club Member
Joined: Jun 2003
Posts: 32,060 |
The hammer provides the all-important initial conditions of the excitation of the string. If not for that, everything would sound pretty much the same, if I remember my old differential equations class correctly.
If the hammer doesn't stay on the string long enough, if it is so hard that it bounces off the string before imparting its energy to the string, the sound will be thin, without much fundamental. If it is too soft, it damps more of the partials than is desirable.
One of the problems that we have understanding how strings works is that most people visualize them wrong. Even physics books will print these pictures of a string moving as the fundamental being this single arc in the string between the two endpoints, with the first overtone being an upward arc on one half of the string and a downward arc on the other half, and adding more up and down arcs for each overtone. The overall picture then looks like a number of little arcs superimposed on larger arcs.
Well, it ain't necessarily so. It turns out that when you actually add each of these overtones together, you actually get something that looks like the original fundamental, except that the high point of the arc is not in the center. Instead, it starts at the point of excitation (or where the hammer hits it), and moves to one of the endpoints of the string, flips over to the opposite side, and goes back the other way. Stretch a slinky or other big spring across a room, and you can see this.
The hammer provides the initial shape of that irregular arc. The qualities of the hammer determine the tone quality of the note.
Semipro Tech
|
|
|
|
Joined: May 2003
Posts: 797
500 Post Club Member
|
500 Post Club Member
Joined: May 2003
Posts: 797 |
|
|
|
|
Joined: Sep 2003
Posts: 5,534
5000 Post Club Member
|
5000 Post Club Member
Joined: Sep 2003
Posts: 5,534 |
[/qb][/QUOTE]Well that makes perfect sense. But why would one assume that a complete sense of tonal performance be achieved by isolating this component from the the other components that contribute to its overall character?
In the end doesn't the hammer introduce energy and establish the excursion of the string? It's elasticity and density determine how it does this. The rest of the story is written by the bridge/board/rim relationship.
I suppose the point I was making was that the harmonic spectrum of the hammer is also a reflection of these related components, is it not? [/QB][/QUOTE]
Again, yes, of course. But it is still necessary to understand, or at least try to understand, the characteristics of each individual part of the system. The failure to work toward this understanding has resulted in many pianos produced and shipped with mis-matched hammers.
If you have no idea what characteristics go into making a hammer with characteristics suitable for your particular overall scale how could you possibly decide which hammer to use? With any given scale some hammers will be too soft and/or light while others will be too hard and/or massive. It is useful to know and understand what is ‘hard’ and what is ‘soft.’ Until you know something about hammers how hammers work and how to predict their performance through testing and measuring how will you know where to start? Yamahas and Steinways require hammers of quite a different sort. Don't you think it will be advantageous for each manufacturer to understand how to measure and test for the physical characteristics of the hammers they specify and/or build?
Without some method of measuring and testing how will you be able to carry out even the most basic quality control? You can't just say, "Oh, well, it's all an interactive system and it will all work out in the end." Of course it is an interactive system but each component must function within certain design parameters and standards to form a unified whole.
Del
Delwin D Fandrich Piano Research, Design & Manufacturing Consultant ddfandrich@gmail.com (To contact me privately please use this e-mail address.)
Stupidity is a rare condition, ignorance is a common choice. --Anon
|
|
|
|
Joined: May 2001
Posts: 1,731
1000 Post Club Member
|
1000 Post Club Member
Joined: May 2001
Posts: 1,731 |
Delwin you said; “If memory serves you were making a real issue of certain manufacturers and/or distributors hiding behind names that have nothing to do with who it is actually building them.”
Your memory is not any better than your perception was of the situation at that time. If you would have taken the time to read the whole thread that this occurred in you would see that it wasn't I taking issue. Oh, but it had nothing to do with taking the time to read it, it was a matter of perception.
You said; “Unfortunately these numbers tell us very little about the tonal performance of the hammer.”
Again your perception of the situation was skewed, I was performing a simple QC test to determine the constancy of a supplier to a manufacturers specifications. Tonal performance was not a concern at that time.
You said; “I think it is nice to know who one is dealing with whether that happens to be a pianomaker or someone on the internet.”
Look at my member number, I have been here from day one, and 2 years on the forum that preceded this one, a long time before you. I communicate daily with selected members here by, email, mail, and phone. I have been to some members homes and some have been to mine. I have not ever tried to sell or promote any product here.
It is nice to know who one is dealing with, but if you don't like it, don't deal. You addressed me remember.
You had a lot going for you, if you wouldn't have had that perception problem, you might have amounted to something besides a worn out technician writing pseudo scientific articles for the PTG journal
Keep Smiling lb
|
|
|
|
Joined: Sep 2003
Posts: 5,534
5000 Post Club Member
|
5000 Post Club Member
Joined: Sep 2003
Posts: 5,534 |
Originally posted by lb:
You had a lot going for you, if you wouldn't have had that perception problem, you might have amounted to something besides a worn out technician writing pseudo scientific articles for the PTG journal
Keep Smiling lb I will. Del
Delwin D Fandrich Piano Research, Design & Manufacturing Consultant ddfandrich@gmail.com (To contact me privately please use this e-mail address.)
Stupidity is a rare condition, ignorance is a common choice. --Anon
|
|
|
|
Joined: Feb 2003
Posts: 1,426
1000 Post Club Member
|
1000 Post Club Member
Joined: Feb 2003
Posts: 1,426 |
Any opinions on this?
http://www.cs.ioc.ee/~stulov/smac03.pdf
|
|
|
|
|
|
Piano
by Gino2 - 04/17/24 02:34 PM
|
Piano
by Gino2 - 04/17/24 02:23 PM
|
|
Forums43
Topics223,405
Posts3,349,434
Members111,637
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|